The Sunaprime 612 is a high performance bisphenol A based epoxy primer containing zinc phosphate, to resist corrosion in the harshest environments. Due to its superior adhesion Sunaprime 612 can be applied directly to smooth metal as well as to a shot-blasted substrate. Sunaprime has been formulated to properly fill the single coat sandblasting profile due to its high solids content..
The Sunaprime 612 has excellent adhesion. Excellent anti-corrosive protection.
Can be used on trailers, wagons, industrial equipment, truck chassis, snow blowers, agricultural equipment, heavy equipment, reservoir.
The quality of the preparation is essential for adherence. The surface to be covered must be clean and free of any contamination.
Drying time was calculated at 77°F or 25°C at 40% humidity. Dust-free drying is 45-60 minutes. For ready to handle, It is 4 hours. Dry in depth it is 48 hours
The hardener for this product is 612-000B. We have also formulated a hardener that helps keep the liquid in place during application., which saves you from behind the scenes. It's 612-001B. You mix 4 parts by volume of A for 1 volume part of B.
For finishing, we recommend the series 7000. It can be covered after 60 minutes.
The Sunaprime 612 is matte and we offer it to you in gray.
This primer is applicable between 10°C to 30°C at a humidity level which does not exceed 80%. It is important to find these conditions during application and for drying time.
